Trade licensing overview · glazier
How glazier licensing works — Kansas
How this trade is regulated in Kansas. none-in-pilot-states The framework below describes the national pathway most glaziers in Kansas follow.
Glazing is not a state-licensed trade as a person-level credential in any Trades Navigator pilot state; California requires a C-17 Glazing Contractor license for the contracting business, not the worker. Most glaziers qualify through the IUPAT / Finishing Trades Institute four-year apprenticeship or through non-union DOL-registered programs, layered with OSHA fall-protection training and manufacturer or industry installation certifications.
Glazier wages in Kansas · BLS OES A01 2024
Wages are state-level annual figures from the U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics program (A01 2024). Specific glazier earnings in Kansas vary by metro area, employer type, union membership, and years of experience. Verify the current state and metro figures on the BLS OES site (bls.gov/oes).
What this trade actually looks like in Kansas
Glazier work in Kansas concentrates in the Kansas City metro (Johnson and Wyandotte counties), Wichita, and Topeka, with aerospace-supplier construction in Wichita, hospital and university scope across the state, and suburban Johnson County commercial driving steady storefront and mid-rise glazing. Many KC metro glaziers work both Kansas and Missouri sides of the line. IUPAT density is moderate; the Kansas City Glaziers Local serves both states.
Where they work
Johnson and Wyandotte counties (Overland Park, Olathe, Lenexa, Kansas City KS, with suburban commercial, KU Med campus, and corporate), Wichita (Spirit AeroSystems, Textron Aviation, downtown), Topeka (state government), Lawrence (KU), and Manhattan (K-State and Fort Riley-adjacent) carry the scope.
Pay context
BLS OES national median for glaziers (47-2121) was $50,360 in May 2024. Kansas statewide medians track near or slightly below the national figure, with the Kansas City metro on the Kansas side at or above national and Wichita closer to statewide. Cost of living in Kansas is moderate. Pull the current Kansas median from BLS OES 47-2121 by state and the Kansas City and Wichita MSA tables. See https://www.bls.gov/oes/current/oes_ks.htm.
Training pathway
Kansas glazier apprenticeship intake commonly runs through IUPAT Glaziers Local 558 (Kansas City, serving both Kansas and Missouri) and through open-shop contractor helper programs in Wichita and Topeka. The Kansas Department of Commerce registers apprenticeships. Johnson County Community College, Washburn Institute of Technology in Topeka, and WSU Tech in Wichita run construction tech programs that feed adjacent trades.
Considerations
If you care about Kansas City metro commercial scope, Wichita aerospace-supplier construction, and a union pathway through Local 558, Kansas offers a working mid-tier market. If you care about top-of-scale wages, larger metros sit ahead. The KC metro split between Kansas and Missouri means many glaziers work both sides of the line over a career.
Kansas glazier snapshot
| MSA | Employed | Median wage |
|---|---|---|
| Kansas City, MO-KS | 470 | $56,800 |
| Wichita, KS | 130 | $46,140 |
STATE LICENSE STATUS
No pilot state (TX, CA, FL, NY, IL) issues a person-level glazier license. California requires a C-17 Glazing Contractor classification through the Contractors State License Board for any business contracting glazing work (https://www.cslb.ca.gov/About_Us/Library/Licensing_Classifications/C-17_-_Glazing.aspx), but employees of a licensed contractor are not individually licensed. Florida has no separate glazing specialty license under the Construction Industry Licensing Board (http://www.myfloridalicense.com/DBPR/construction-industry/); glazing falls under general or specialty contractor registration where dollar thresholds trigger it. Texas, New York, and Illinois have no statewide glazier credential, though local jurisdictions may require business registration or scaffold / hoisting permits. Architectural glazing authority typically travels with the contractor's license, OSHA credentials, and manufacturer certifications rather than a personal state card.
IUPAT / FTI APPRENTICESHIP
The International Union of Painters and Allied Trades (IUPAT) represents glaziers as one of its core crafts alongside painters, drywall finishers, and sign and display workers (https://iupatglaziers.com/). Training runs through the Finishing Trades Institute (FTI) and its network of local FTI Training Centers (https://www.finishingtradesinstitute.org/), typically a four-year registered apprenticeship combining on-the-job hours with related classroom instruction. Curriculum covers architectural glazing, storefront systems, curtain wall, auto glass, and related subtracks depending on the local market. Registered IUPAT glazier apprenticeships appear in the DOL RAPIDS database and are searchable through the federal apprenticeship finder (https://www.apprenticeship.gov/apprenticeship-job-finder). The U.S. Bureau of Labor Statistics lists glaziers under SOC 47-2121 and documents apprenticeship as a primary entry route (https://www.bls.gov/ooh/construction-and-extraction/glaziers.htm).
SAFETY
OSHA 10-hour and 30-hour Construction Outreach courses are the baseline safety credentials for glazing work (https://www.osha.gov/training/outreach/construction). Curtain-wall and high-rise glazing trigger OSHA fall-protection requirements under 29 CFR 1926 Subpart M, which mandates protection for work at heights of six feet or more in construction (https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926SubpartM). Scaffold work is governed by 29 CFR 1926 Subpart L (https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926SubpartL). PPE for glass handling includes cut-resistant gloves and sleeves, eye protection, and, for large lites, vacuum lifts or suction-cup rigs rated to the panel weight. Silica exposure rules under 29 CFR 1926.1153 apply when cutting or grinding glazing substrates (https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.1153).
SPECIALTY CERTIFICATIONS
The Fenestration and Glazing Industry Alliance (FGIA) publishes installation standards and training for fenestration products including windows, curtain walls, and storefront systems (https://safety.fgia.com/). AAMA (the Architectural Aluminum Manufacturers Association, now part of FGIA) certifications cover curtain-wall and architectural-aluminum systems (https://fgiaonline.org/). Auto glass replacement work is governed by the Auto Glass Safety Council's AGRSS standard (ANSI/AGRSS 002-2015) for retention-system integrity in crash scenarios, with Registered Member Company credentials issued by the Auto Glass Safety Council (https://www.agsc.org/). Manufacturer-specific certifications from firms such as Kawneer, YKK AP, and Oldcastle BuildingEnvelope are commonly required on commercial curtain-wall projects and are documented at the project-submittal level rather than through a government registry.
NON-UNION PATHWAY
Non-union glazing contractors employ a substantial share of residential and small-commercial glaziers, particularly in right-to-work states. Entry in this track is typically through direct hire as a helper with on-the-job training, supplemented by DOL-registered non-union apprenticeship programs listed in the RAPIDS apprenticeship finder (https://www.apprenticeship.gov/apprenticeship-job-finder). Some employers rely on in-house certification tied to specific curtain-wall or storefront systems, plus OSHA 10/30 cards and manufacturer training. BLS OOH notes that glaziers enter the field through apprenticeship, technical school, or on-the-job training, with median wage and employment figures reported at the national level (https://www.bls.gov/ooh/construction-and-extraction/glaziers.htm). Regardless of union status, federal OSHA fall-protection and silica rules apply equally on the jobsite.