Trade licensing overview · glazier
How glazier licensing works — Virginia
How this trade is regulated in Virginia. none-in-pilot-states The framework below describes the national pathway most glaziers in Virginia follow.
Glazing is not a state-licensed trade as a person-level credential in any Trades Navigator pilot state; California requires a C-17 Glazing Contractor license for the contracting business, not the worker. Most glaziers qualify through the IUPAT / Finishing Trades Institute four-year apprenticeship or through non-union DOL-registered programs, layered with OSHA fall-protection training and manufacturer or industry installation certifications.
Glazier wages in Virginia · BLS OES A01 2024
Wages are state-level annual figures from the U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics program (A01 2024). Specific glazier earnings in Virginia vary by metro area, employer type, union membership, and years of experience. Verify the current state and metro figures on the BLS OES site (bls.gov/oes).
What this trade actually looks like in Virginia
Glazier work in Virginia concentrates in Northern Virginia (the DC suburbs), Hampton Roads, and the Richmond corridor, with federal commercial, data-center construction in Loudoun and Prince William counties (the largest data-center cluster in the world), Pentagon and federal-agency work, hospital, university, and shipyard-adjacent commercial driving deep scope. Coastal Hampton Roads carries shipbuilding-adjacent commercial and hurricane-impact glazing. IUPAT Glaziers Local 963 (Northern Virginia / DC) provides registered union pathway with strong density on federal commercial.
Where they work
Northern Virginia (Tysons, Reston, Arlington, Alexandria, Loudoun and Prince William data centers, Pentagon-adjacent, Dulles corridor), Richmond (downtown, VCU and VCU Medical, Capital Square, suburban commercial), Hampton Roads (Norfolk, Virginia Beach, Newport News, with Naval Station Norfolk-adjacent, NNS shipyard-adjacent, downtown), Charlottesville (UVA and UVA Medical), and the Roanoke and Lynchburg regional medical corridors carry the scope.
Pay context
BLS OES national median for glaziers (47-2121) was $50,360 in May 2024. Virginia statewide medians sit above the national figure, with Northern Virginia pulling toward DC metro rates and Hampton Roads and Richmond closer to statewide. Cost of living in Northern Virginia is high; Hampton Roads and Richmond are moderate. Pull the current Virginia median from BLS OES 47-2121 by state and the Washington-Arlington-Alexandria MSA table. See https://www.bls.gov/oes/current/oes_va.htm.
Training pathway
Virginia has registered IUPAT Glaziers apprenticeship intake through Local 963 covering Northern Virginia and the DC suburbs, with one of the deeper federal-commercial-focused glazier programs in the country. The Virginia Department of Labor and Industry Apprenticeship Program registers programs. Open-shop commercial glazing contractors operate alongside, particularly outside Northern Virginia. Northern Virginia Community College, Tidewater Community College, and Virginia Western Community College run construction tech programs that feed adjacent trades.
Considerations
If you care about federal commercial scope, the world's largest data-center build pipeline in Loudoun County, and a registered union path through Local 963, Northern Virginia has a deep glazier market in the Mid-Atlantic. If you care about housing affordability, Hampton Roads and Richmond run at lower cost than NoVA with their own steady pipelines. Federal-spec security glazing experience is a portable specialty inside the cleared-contractor world.
Virginia glazier snapshot
| MSA | Employed | Median wage |
|---|---|---|
| Washington-Arlington-Alexandria, DC-VA-MD-WV | 1,080 | $63,740 |
| Richmond, VA | 110 | $52,650 |
STATE LICENSE STATUS
No pilot state (TX, CA, FL, NY, IL) issues a person-level glazier license. California requires a C-17 Glazing Contractor classification through the Contractors State License Board for any business contracting glazing work (https://www.cslb.ca.gov/About_Us/Library/Licensing_Classifications/C-17_-_Glazing.aspx), but employees of a licensed contractor are not individually licensed. Florida has no separate glazing specialty license under the Construction Industry Licensing Board (http://www.myfloridalicense.com/DBPR/construction-industry/); glazing falls under general or specialty contractor registration where dollar thresholds trigger it. Texas, New York, and Illinois have no statewide glazier credential, though local jurisdictions may require business registration or scaffold / hoisting permits. Architectural glazing authority typically travels with the contractor's license, OSHA credentials, and manufacturer certifications rather than a personal state card.
IUPAT / FTI APPRENTICESHIP
The International Union of Painters and Allied Trades (IUPAT) represents glaziers as one of its core crafts alongside painters, drywall finishers, and sign and display workers (https://iupatglaziers.com/). Training runs through the Finishing Trades Institute (FTI) and its network of local FTI Training Centers (https://www.finishingtradesinstitute.org/), typically a four-year registered apprenticeship combining on-the-job hours with related classroom instruction. Curriculum covers architectural glazing, storefront systems, curtain wall, auto glass, and related subtracks depending on the local market. Registered IUPAT glazier apprenticeships appear in the DOL RAPIDS database and are searchable through the federal apprenticeship finder (https://www.apprenticeship.gov/apprenticeship-job-finder). The U.S. Bureau of Labor Statistics lists glaziers under SOC 47-2121 and documents apprenticeship as a primary entry route (https://www.bls.gov/ooh/construction-and-extraction/glaziers.htm).
SAFETY
OSHA 10-hour and 30-hour Construction Outreach courses are the baseline safety credentials for glazing work (https://www.osha.gov/training/outreach/construction). Curtain-wall and high-rise glazing trigger OSHA fall-protection requirements under 29 CFR 1926 Subpart M, which mandates protection for work at heights of six feet or more in construction (https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926SubpartM). Scaffold work is governed by 29 CFR 1926 Subpart L (https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926SubpartL). PPE for glass handling includes cut-resistant gloves and sleeves, eye protection, and, for large lites, vacuum lifts or suction-cup rigs rated to the panel weight. Silica exposure rules under 29 CFR 1926.1153 apply when cutting or grinding glazing substrates (https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.1153).
SPECIALTY CERTIFICATIONS
The Fenestration and Glazing Industry Alliance (FGIA) publishes installation standards and training for fenestration products including windows, curtain walls, and storefront systems (https://safety.fgia.com/). AAMA (the Architectural Aluminum Manufacturers Association, now part of FGIA) certifications cover curtain-wall and architectural-aluminum systems (https://fgiaonline.org/). Auto glass replacement work is governed by the Auto Glass Safety Council's AGRSS standard (ANSI/AGRSS 002-2015) for retention-system integrity in crash scenarios, with Registered Member Company credentials issued by the Auto Glass Safety Council (https://www.agsc.org/). Manufacturer-specific certifications from firms such as Kawneer, YKK AP, and Oldcastle BuildingEnvelope are commonly required on commercial curtain-wall projects and are documented at the project-submittal level rather than through a government registry.
NON-UNION PATHWAY
Non-union glazing contractors employ a substantial share of residential and small-commercial glaziers, particularly in right-to-work states. Entry in this track is typically through direct hire as a helper with on-the-job training, supplemented by DOL-registered non-union apprenticeship programs listed in the RAPIDS apprenticeship finder (https://www.apprenticeship.gov/apprenticeship-job-finder). Some employers rely on in-house certification tied to specific curtain-wall or storefront systems, plus OSHA 10/30 cards and manufacturer training. BLS OOH notes that glaziers enter the field through apprenticeship, technical school, or on-the-job training, with median wage and employment figures reported at the national level (https://www.bls.gov/ooh/construction-and-extraction/glaziers.htm). Regardless of union status, federal OSHA fall-protection and silica rules apply equally on the jobsite.