Trade licensing overview · millwright
How millwright licensing works — Kansas
How this trade is regulated in Kansas. none-in-pilot-states The framework below describes the national pathway most millwrights in Kansas follow.
Millwrights are not state-licensed in any pilot state. Work authority flows from employer competency verification, registered apprenticeship completion, and task-specific certifications. Most notably, the United Brotherhood of Carpenters (UBC) Millwright apprenticeship, precision-machinery certifications through the Vibration Institute, and NCCCO rigger/signalperson credentials for crane work.
Millwright wages in Kansas · BLS OES A01 2024
Wages are state-level annual figures from the U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics program (A01 2024). Specific millwright earnings in Kansas vary by metro area, employer type, union membership, and years of experience. Verify the current state and metro figures on the BLS OES site (bls.gov/oes).
What this trade actually looks like in Kansas
Millwright work in Kansas concentrates around aerospace (Spirit AeroSystems and Textron in Wichita), grain processing and ethanol across the central plains, refining and chemical (CHS in McPherson, Coffeyville Resources), meatpacking in the southwest (Garden City, Dodge City, Liberal), and the auto and supplier base around Kansas City. Wind energy adds limited industrial work.
Where they work
Concentrations sit in Wichita for Spirit AeroSystems and Textron Aviation (Cessna, Beechcraft); the Kansas City metro (Wyandotte, Johnson counties) for GM Fairfax, Hill's Pet Nutrition, and diversified manufacturing; McPherson and Coffeyville for refining and chemical; the southwest (Garden City, Dodge City, Liberal) for Tyson and National Beef meatpacking; Topeka for Goodyear and Frito-Lay; and Hutchinson and central Kansas for grain and ag.
Pay context
Kansas is not broken out for millwrights in the wages dataset shipped here. The BLS OES national median for millwrights (49-9044) was $63,990 as of May 2024. Kansas wages typically sit modestly below national, with refining and aerospace paying at the top of the state range. Cost of living runs roughly 10 to 12 percent below national. Check the BLS OES Kansas table.
Training pathway
Kansas community colleges (Hutchinson, Johnson County, Wichita Tech) run industrial maintenance programs. WSU Tech in Wichita runs aerospace-aligned mechanical programs that feed Spirit. The UBC Heartland Regional Council of Carpenters covers Kansas. Spirit, GM, and the meatpackers run internal apprentice and helper pipelines. There is no statewide millwright license.
Considerations
If you want aerospace plant work with steady volume, Wichita is the largest cluster in the country outside Seattle and Charleston. If you want meatpacking maintenance in a low-cost area, the southwest offers it. Kansas is right-to-work. Wind project work has slowed; meatpacking and aerospace remain the most reliable employers.
Kansas millwright snapshot
| MSA | Employed | Median wage |
|---|---|---|
| Kansas City, MO-KS | 920 | $75,870 |
| Wichita, KS | 180 | $78,520 |
| Topeka, KS | 110 | $70,240 |
STATE LICENSE STATUS
No pilot state (TX, CA, FL, NY, IL) issues a person-level millwright license. The BLS Occupational Outlook Handbook entry for industrial machinery mechanics, machinery maintenance workers, and millwrights lists no state licensing requirement for the millwright occupation (https://www.bls.gov/ooh/installation-maintenance-and-repair/industrial-machinery-mechanics-and-maintenance-workers-and-millwrights.htm). Employer qualification, the shop's or contractor's demonstration that a worker can install, align, and maintain the specific machinery on site, governs day-to-day work authority. When a millwright performs adjacent tasks that do require a credential (welding to a pressure-vessel code, rigging a critical pick, operating a forklift), the credential attaches to that task, not to a statewide millwright trade license.
UBC MILLWRIGHT APPRENTICESHIP
The United Brotherhood of Carpenters and Joiners of America represents most union millwrights in the U.S. and Canada through its Millwright Regional Councils (https://www.carpenters.org/millwrights/). The UBC Millwright apprenticeship is a registered four-year program combining on-the-job training with classroom and hands-on instruction in precision machine installation, laser alignment, rigging, hydraulics, pneumatics, and welding (https://www.carpenters.org/millwrights/). Advanced and journey-level training is delivered at the International Training Center in Las Vegas, Nevada, where UBC operates a dedicated millwright training facility (https://carpenters.org/training/). Registered millwright apprenticeship sponsors are listed in the U.S. Department of Labor apprenticeship job finder (https://www.apprenticeship.gov/apprenticeship-job-finder).
PRECISION CERTIFICATIONS
Precision machinery work is credentialed task-by-task through private certifying bodies. The Vibration Institute offers four categories of Vibration Analyst certification (Category I through Category IV) aligned to ISO 18436-2, covering data collection, spectrum analysis, advanced diagnostics, and corrective techniques (https://www.vibinst.org/). Laser-alignment proficiency is typically documented through manufacturer training from SKF (https://www.skf.com) and Pruftechnik / Easylaser (https://www.pruftechnik.com). Dynamic balancing, ultrasonic bearing lubrication, and condition-monitoring courses are offered by the Vibration Institute and by equipment OEMs. None of these certifications is a state license. They are employer- and project-recognized credentials that document competency on specific precision tasks.
RIGGING / NCCCO
Most millwright work involves moving heavy machinery, which brings rigging and crane-signaling requirements under federal law. OSHA 29 CFR 1926 Subpart CC, Cranes and Derricks in Construction, requires that signalpersons and riggers used in assembly/disassembly or in hoisting operations be qualified (https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926SubpartCC). The National Commission for the Certification of Crane Operators (NCCCO) issues the most widely accepted credentials: Rigger Level I, Rigger Level II, and Signalperson, each requiring written and practical examinations (https://www.nccco.org). Rigger and signalperson certifications are renewed on a five-year cycle per NCCCO (https://www.nccco.org). A millwright performing critical-lift rigging on a construction site generally carries at least NCCCO Rigger I and Signalperson, plus employer-specific qualification for the lift plan.
NON-UNION PATHWAY
Non-union millwrights typically enter through in-house training programs at large industrial employers (power generation, auto assembly, pulp and paper, food processing, and petrochemical plants) or through community and technical college associate degree programs in industrial maintenance, industrial mechanics, or mechatronics. BLS OOH describes entry through postsecondary nondegree awards and on-the-job training alongside registered apprenticeship (https://www.bls.gov/ooh/installation-maintenance-and-repair/industrial-machinery-mechanics-and-maintenance-workers-and-millwrights.htm). Non-union millwrights pursue the same precision certifications as union members (Vibration Institute analyst levels, laser-alignment training, NCCCO rigger/signalperson) because the credentials are employer-recognized regardless of representation. The DOL apprenticeship finder lists non-union registered sponsors alongside UBC locals (https://www.apprenticeship.gov/apprenticeship-job-finder).