Trade licensing overview · welder
How welder licensing works — South Dakota
How this trade is regulated in South Dakota. none-in-pilot-states The framework below describes the national pathway most welders in South Dakota follow.
Welding is not a state-licensed trade in the United States. Welders prove competence through task-specific welder qualification tests issued by the American Welding Society (AWS) or the employer/procedure referenced by the job's governing code (ASME Section IX, AWS D1.1, API 1104, etc.).
Welder wages in South Dakota · BLS OES A01 2024
Wages are state-level annual figures from the U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics program (A01 2024). Specific welder earnings in South Dakota vary by metro area, employer type, union membership, and years of experience. Verify the current state and metro figures on the BLS OES site (bls.gov/oes).
What this trade actually looks like in South Dakota
Welders in South Dakota support shipbuilding, oil-and-gas pipeline, industrial fabrication, and structural steel. Work concentrates in the Sioux Falls and Sioux City metro areas. The actual mix of project types depends on which segments of South Dakota's economy are active in any given year.
Where they work
BLS reports welder employment in South Dakota concentrated in: Sioux Falls, SD-MN (880 employed, median $49,990); Sioux City, IA-NE-SD (430 employed, median $50,900). Statewide reported employment is 3,480 workers (BLS OES, latest release).
Pay context
BLS OES reports a South Dakota welder median annual wage of $48,340 (SOC 51-4121, latest OES release), -5.2% versus the national median of $51,000. Cost-of-living, metro versus rural premium, union density, and years of experience all move the actual paycheck. Verify the current state and metro figures at https://www.bls.gov/oes/.
Training pathway
AWS-certified welding programs at community colleges plus employer apprenticeships are the standard on-ramp. Pipeline and code welding (B31.3, ASME Section IX) commands premium hourly rates above structural welding.
Considerations
State workforce projections (Projections Central, base 2022–2032) estimate +11.4% growth in welder employment over the decade, with about 390 annual openings. If you care about earnings ceiling, pipeline and rig welding pay highest but require travel and rotational schedules. If you care about stability, in-shop fabrication and structural steel offer steadier work and predictable hours. Union (Boilermakers, Pipefitters) presence varies by metro.
South Dakota welder snapshot
| MSA | Employed | Median wage |
|---|---|---|
| Sioux Falls, SD-MN | 880 | $49,990 |
| Sioux City, IA-NE-SD | 430 | $50,900 |
| Rapid City, SD | 170 | $48,270 |
STATE LICENSE STATUS
No pilot state (TX, CA, FL, NY, IL) issues a person-level welder license. California requires a contractor's license for welding contractors through the Contractors State License Board (https://www.cslb.ca.gov), but the individual welder is not licensed by the state. Florida and Illinois require business registration for welding contractors but no welder license. New York has no statewide welder license, though New York City requires welder qualification testing for certain structural work (https://www.nyc.gov/site/buildings/index.page). Most welding authority travels with the job, not the person: a welder qualifies to a specific Welding Procedure Specification (WPS) on each project (https://www.aws.org/certification).
AWS CERTIFICATIONS
AWS (American Welding Society) issues four primary credentials (https://www.aws.org/certification). Certified Welder (CW) is a performance-based entry credential with no prerequisite courses; the candidate deposits a sound weld inspected by an AWS CWI at an Accredited Testing Facility (https://www.aws.org/certification/page/certified-welder-program). Certified Welding Inspector (CWI) qualifies the holder to determine whether a weldment meets acceptance criteria. Certified Welding Educator (CWE) covers classroom and shop instruction. Certified Robotic Arc Welding (CRAW) validates robotic-welding operators and technicians. The Senior CWI path renews every 5 years and recertifies every 10 years per AWS (https://www.aws.org/certification).
PROCEDURE-BASED QUALIFICATION
Day-to-day welding authority usually comes from a Welder Performance Qualification (WPQ) passed against the employer's Welding Procedure Specification (WPS), under ASME Boiler & Pressure Vessel Code Section IX (https://www.asme.org/codes-standards/find-codes-standards/bpvc-ix-bpvc-section-ix-welding-brazing-fusing-qualifications), AWS D1.1 Structural Welding Code: Steel (https://www.aws.org), or API 1104 for pipelines (https://www.api.org). These qualifications carry no state fee and no continuing-education hours. AWS Certified Welder maintenance documentation is due every six months confirming continued employment in the certified welding process, with a 60-day extension window and a $50 late fee before retesting is required (https://www.aws.org/certification/page/certified-welder-program). If welding-process parameters change materially, re-qualification is required.
TYPICAL PATHWAY
The U.S. Bureau of Labor Statistics lists welders, cutters, solderers, and brazers under SOC 51-4121 and describes entry through technical school, community college, or on-the-job training, sometimes with registered apprenticeship (https://www.bls.gov/ooh/production/welders-cutters-solderers-and-brazers.htm). Union pathways run through the Boilermakers (https://boilermakers.org), Ironworkers (https://www.ironworkers.org), United Association pipe trades (https://www.ua.org), and Sheet Metal Workers (https://smart-union.org). Non-union pathways rely on NCCER welding modules (https://www.nccer.org) and Weld-Ed / Weld Bonding Institute curricula. The DOL RAPIDS apprenticeship finder lists registered welding programs by ZIP code (https://www.apprenticeship.gov/apprenticeship-job-finder).
WHERE LICENSING DOES APPLY
Pressure-vessel and boiler welding is governed by jurisdictional authority under the National Board Inspection Code (NBIC), which most U.S. and Canadian jurisdictions adopt into law (https://www.nationalboard.org). State Chief Inspectors issue Certificates of Competency (Grade B, Grade C, Machine Welding Operator, or Tack Welder) to welders who pass the jurisdiction's examination (https://www.nationalboard.org). Some cities require certified welders for sprinkler, fire-safety, or structural work. New York City is the most documented example (https://www.nyc.gov/site/buildings/index.page). Commercial underwater welding and pipeline-pigging work require separate credentials outside AWS (https://www.aws.org/certification).